Want to add an extra layer of protection and curb appeal to your home? Installing a storm door is a great project, and it's totally doable, even if you're not a seasoned DIYer! This guide will walk you through installing a storm door when you have brick molding around your entryway. Let's get started!

## What You'll Need

Before you dive in, gather these essential tools and materials:

*   **New Storm Door Kit:** Make sure it's the right size for your door opening!
*   **Measuring Tape:** Accuracy is key.
*   **Pencil:** For marking measurements.
*   **Safety Glasses:** Protect your eyes!
*   **Work Gloves:** Keep your hands safe.
*   **Power Drill/Driver:** With various drill bits and screwdriver bits.
*   **Level:** To ensure a perfectly aligned door.
*   **Caulk Gun:** For sealing gaps.
*   **Exterior-Grade Caulk:** Choose a color that matches your trim.
*   **Shims:** For fine-tuning the fit.
*   **Wood Screws:** Appropriate length for your brick molding and door frame.
*   **Hacksaw or Utility Knife:** For trimming shims if needed.
*   **Clamps (Optional):** Can be helpful for holding the storm door in place.

## Step-by-Step Installation

### 1. Preparing the Opening

*   **Measure, Measure, Measure:** Double-check the width and height of your door opening, including the brick molding. Compare these measurements to the storm door's specifications.
*   **Inspect the Brick Molding:** Look for any damage, like rot or cracks. Repair or replace any damaged sections before proceeding.
*   **Clean the Area:** Remove any debris, dirt, or old caulk from the brick molding and surrounding area. A clean surface ensures better adhesion for the new caulk.

### 2. Assembling the Storm Door Frame

*   **Follow the Manufacturer's Instructions:** Each storm door kit is slightly different, so carefully read and follow the assembly instructions provided.
*   **Assemble the Frame:** Typically, this involves connecting the top, bottom, and side rails of the storm door frame using screws.

### 3. Installing the Storm Door Frame

*   **Position the Frame:** Carefully position the assembled storm door frame within the brick molding opening. Center it horizontally and vertically.
*   **Shim for a Perfect Fit:** If there are any gaps between the frame and the brick molding, use shims to fill them. Place shims behind the frame at the top, bottom, and middle on both sides. The goal is to make the frame perfectly plumb (vertical) and level (horizontal).
*   **Secure the Frame:** Once the frame is properly positioned and shimmed, pre-drill pilot holes through the frame and into the brick molding. Use wood screws to securely attach the frame to the brick molding. Don't overtighten the screws.

### 4. Installing the Storm Door

*   **Attach Hinges:** Attach the storm door to the frame, following the manufacturer's instructions. This usually involves screwing the hinges to both the door and the frame.
*   **Test the Swing:** Open and close the storm door to check its swing. Make sure it moves smoothly and doesn't bind or rub against the frame. Adjust the shims if necessary to correct any issues.
*   **Install the Closer:** Install the door closer mechanism according to the instructions. This will allow the door to close automatically and prevent it from slamming.
*   **Install the Handle and Latch:** Install the handle and latch hardware following the manufacturer's instructions.

### 5. Sealing and Finishing

*   **Caulk the Gaps:** Apply a bead of exterior-grade caulk around the perimeter of the storm door frame where it meets the brick molding. This will seal any gaps and prevent air and water from entering.
*   **Trim the Shims:** Use a hacksaw or utility knife to trim any excess shims that are sticking out from behind the frame. Cut them flush with the brick molding.
*   **Clean Up:** Remove any debris, tools, and materials from the work area.

## Important Tips and Considerations

*   **Enlist a Helper:** Having a friend or family member assist you with this project can make it much easier, especially when lifting and positioning the storm door.
*   **Check Local Building Codes:** Before starting, check with your local building department to see if there are any specific codes or regulations you need to follow.
*   **Consider the Weather:** Choose a day with fair weather to install your storm door. Avoid installing it on a windy or rainy day.
*   **Watch Videos:** If you're unsure about any step, watch online tutorial videos for additional guidance.

With a little patience and the right tools, you can successfully install a storm door with brick molding and add value and protection to your home!

Learn how to install a storm door with brick molding yourself! This step-by-step guide makes it easy for homeowners, even beginners.

Brick Molding — posts & guides

Conquer That Storm Door: A Simple Guide for Brick Molding Installs